FR Workwear for Linemen & Utility Workers — Every Layer Rated, Every Exposure Covered
Linemen and utility workers face a combination of hazards that most FR programs don't address simultaneously: arc flash from energized equipment, fall arrest requirements from working at height, visibility requirements from working near traffic, and cold weather exposure from working outdoors year-round. Standard FR workwear solves one of those problems. This collection solves all of them.
Every garment here is NFPA 2112 certified by UL and meets NFPA 70E and ASTM F1506 standards — with CSA Z462 and CGSB 155.20 certification for Canadian utility programs. CAT 2 through CAT 3 across the permanent line. Use the CAT Rating filter to shop by your program's required protection level.
What linemen and utility workers reach for:
The Lanyard Access Jacket — the garment built for you. Most FR jackets force a choice: wear the jacket for warmth and FR protection, or wear the harness for fall protection on top. The FR Canvas Lanyard Access Jacket ($340) solves this with a back flap opening and hook-and-loop closure that lets your lanyard pass through while the jacket stays on. FR protection, fall arrest capability, and insulated warmth — simultaneously. 35 cal CAT 3. The only FR jacket in our line built specifically for harness wearers.
Hi-Vis Dual Compliance — utility crews working near traffic need both arc flash protection and ANSI visibility compliance. Layering a non-FR hi-vis vest over an FR shirt creates compliance questions and adds bulk. Our FR garments with built-in reflective trim eliminate both problems:
- FR Hi-Vis Long Sleeve Shirt — 16 cal CAT 2, ANSI Class 3, segmented heat-sealed reflective trim for maximum flexibility and breathability
- FR Hi-Vis Vest — 9.8 cal CAT 2, arc-rated fabric, 2" silver reflective trim, adds FR visibility compliance over any FR shirt
- FR Coveralls with hi-vis trim — full-body dual compliance in a single garment
FR Canvas Jackets — CAT 3 Outerwear for Outdoor Work. Linemen work outside in every condition. Our permanent-line canvas jackets carry 35–38 cal CAT 3 protection in three configurations: the FR Canvas Field Jacket for hard hat wearers who need coverage without a hood, the FR Canvas Hooded Jacket for cold weather head coverage, and the FR Canvas Lanyard Access Jacket for harness wearers. Every one is FR cotton canvas shell, FR modacrylic insulation, FR twill lining — every layer rated.
Cold Weather Layering — outdoor utility work in winter requires a complete FR layered system. Every layer needs to be FR-rated because non-FR synthetic base layers melt against skin when the outer FR garment is exposed. The complete system:
FR Base Layer (6 cal CAT 1) → FR Uniform Shirt or Henley (8–10 cal CAT 2) → FR Hoodie (22 cal CAT 2) → FR Canvas Jacket (35–38 cal CAT 3). Every layer rated. Every layer doing its job.
FR Head and Face Protection — the gap between your collar and your hard hat is where arc flash exposure goes unaddressed. For linemen working overhead in confined spaces or bucket trucks where arc flash can come from an unexpected angle:
- FR Balaclava — 9.1 cal CAT 2, covers face, ears, and neck
- FR Zero Hood Winter Liner — 17 cal CAT 2, attaches directly to your hard hat via hook-and-loop closure
- FR Winter Liner — 17 cal CAT 2, standalone head and face coverage for cold weather work
- FR Shield Neck Gaiter — 9.5 cal CAT 2, multi-wear neck and face protection
- FR Utility Beanie — 22 cal CAT 2, the highest-rated FR beanie available
Canadian Utility Programs — Rasco has operated in Canada since founding and maintains Canadian warehouse and operations. Every garment with CSA Z462 and CGSB 155.20 certification is labeled as such. For Canadian utility programs, hydro companies, and telecommunications workers, the Canadian certs are there.
Program Documentation — safety managers and procurement officers can find complete technical documentation including arc ratings, cert numbers, and fabric specs at our Technical Information page.
Common questions:
Do linemen need NFPA 70E or NFPA 2112 compliance? Both. NFPA 70E governs arc flash protection from electrical equipment — the primary lineman hazard. NFPA 2112 governs flash fire protection. Most utility programs require compliance with both. Every garment in this collection carries NFPA 2112 certified by UL and meets NFPA 70E.
Can I wear a regular FR jacket over my harness? Standard FR jackets don't accommodate a fall arrest harness properly — wearing the jacket over the harness restricts harness function, and wearing the harness over the jacket defeats the FR protection of the jacket at exactly the points where fall arrest hardware is most likely to contact energized equipment. The FR Canvas Lanyard Access Jacket is the only solution that keeps both systems working simultaneously.
What ANSI class do I need for road-adjacent utility work? ANSI/ISEA 107 Class 3 is required for workers exposed to traffic at speeds above 50 mph and in most road construction and utility right-of-way environments. Our FR Hi-Vis Long Sleeve Shirt carries ANSI Class 3 certification. For lower-speed environments, Class 2 may be acceptable — check your program's specific requirements.
Does Rasco supply Canadian utility programs? Yes. Rasco Canada operates a dedicated Canadian warehouse and has supplied Canadian utility, hydro, and telecommunications programs since the company's founding. Garments with CSA Z462 and CGSB 155.20 are labeled in this collection.
What's the difference between the FR Zero Hood and the FR Winter Liner? Both carry 17 cal CAT 2. The FR Zero Hood attaches directly to a hard hat via hook-and-loop closure — designed specifically for linemen and utility workers who wear a hard hat and need head coverage that stays in place underneath it. The FR Winter Liner is a standalone head covering worn without hard hat attachment — better for welders, construction workers, and outdoor crews who don't wear a hard hat.
Free shipping on orders over $150. Backed by the Tough As You Guarantee on every garment.
